Versitron MCC-16RM Guía de instalación descargar pdf (Pagina 11)

11 www.versitron.com

2.2.2 Management Module

The chassis comes with one pre-installed Management module. The module facilitates the following functions:

• Direct out-of-band management via RS-232 console port

• SNMP agent to serve in-band management via SNMP protocol

• Telnet console in-band management via TCP/IP protocol

• HTTP host to serve web-based in-band management

• Monitoring all MCs status installed in the system

• Monitoring system power and fan status

See figure below for major components on the management module panel:

Console Port

This port is a 9-pin male D-sub connector. It serves as an RS-232 DTE port. Refer to Chapter 4 for the console

operation. The pin definitions are:

Pin 2 RXD

Pin 3 TXD

Pin 4 DTR

Pin 5 GND

Pin 6 DSR

UTP Port

This is an auto-negotiation 10/100BASE-TX LAN port and provides a shielded RJ-45 jack with MDI definition.

This port must connect to your TCP/IP network for all in-band management operations.

LED Indicators Color

States Interpretation

P1 Green On Power 1 module is ON

P2 Green On Power 2 module is ON

DIAG Green On CPU initialization

Off Initialization complete

FAN Green On Fan failure detected

Off Fan in normal operation

CONSOLE Green On Rx activities of console port

LNK/ACT Green On LAN port link is active

Green Blink Tx/Rx activities of UTP port

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 46 47

Sin comentarios

Versitron MCC-16RM Guía de instalación Pagina 11